LEOPARD WALL

Early alarm sensor system for walls, grounds and roofs.

> Indoor alarm sensor for perforation detection.

> Early intruder detection, so we have enough time to report or act against the burglary.

> Specially designed for big area protection such as Safe Deposits or Industrial Warehouses.

> Zones from 1 to 400 meters (1280 feet).

> Network working mode available.

> System is not affected by your normal activity.

> Really low maintenance and long life.

LEOPARD WALL is an alarm sensor system that performs an early intrusion alert in grounds, roofs or walls. In order to do that, LEOPARD WALL uses fiber optic technology, this feature makes it really cost-effective for big area protection.

LEOPARD WALL is able to detect vibrations on your wall, moreover it can detect the particular wave shapes of a hole making intrusion vibration besides it filters the other vibrations making this system an effective intruder detector.

LEOPARD WALL can be easily installed, only you have to spread and attach the sensitive cable to your protected area, and connect your analyzer in only one point.

Download PDF

Contact

Installation
Technical data

Installation

Spread and fix the sensitive cable

Install and connect the analyzer

Setup the system

Technical data

Processor	ARM microcontroller.
Voltage and consumption	15-48Vdc. / <5w.
Operating temperature.	-40º C to +75º C.
Anemometer	It is no needed, virtual anemometer inside with sensitivity in the entire zone.
Auxiliary Inputs	2-4 Digital Inputs.
Outputs	2-7 dry contacts 120Vac/0,3A.
Monitor and setup connection	...xx = ” “ USB type B (Small perimeters with relay connection). ...xx = ”C“ USB & dual RS485 with signal regeneration (Big perimeters). ...xx = ”IP” USB & IP (RJ45) (All kind of perimeters).
Power failure control	Yes, with external UPS 12v battery connection with charge surveillance. (”BATT01”)
Setup and Monitor (for installers)	Yes, with “Leopard Setup” software.
Standard connections	2-4u. Fiber ST plug. 1u integrated connector with 15-48Vdc Power plug. External UPS battery . Inputs. Relays. 1u. USB plug.
Other connections (Depends on model)	2u. RS485 plugs. 1u. IP (RJ45) plug.
Sensitive fiber	Leopard Multimode.
Event & alarm memory	1000 events.
Auxiliary units for big perimeters.	Master units (M210IP, M217) Relay unit (R220)
Alarm & status monitoring software	Yes, with “ Leopard API” & “Leopard Control Center” software.